Easy to assemble, Gabbioneta BSD pumps minimise the number of rotating parts, saving space and lowering installation and operating costs.
The BSD range Gabbioneta Pumps® are heavy duty process vertical in-line overhung pumps with single suction impeller, designed in a back pull-out configuration for easy maintenance activities without motor removal.
Computer desinged and fully machinned diffusers reduces virtually all hydraulic radial forces and limits shaft deflection at any flow.
As option, pumps can be equipped with grease lubricated bearing, pure or purge oil mist lubrication, anti-reverse rotation device, steam jackets and casing insulations.
The VD and VLD centrifugal pump series are engineered to minimize NPSHr on high capacity vertical applications.
The VD and VLD Gabbioneta Pumps® are vertical multistage, volute type, heavy duty process pumps, available in double- casing or wet pit configuration.
Double suction 1st stage impeller permits to meet low NPSH requirements, while the closed type impeller with front and rear wear rings and balancing holes minimizes the axial thrust.
Labyrinths and deflectors at both bearing housing covers maximize protection against dirt and pump shaft, in one or two pieces, is fully machined to respect the more restrictive run-out API limits.
Additional rigid coupling, to facilitate mechanical seal maintenance activities, and axial thrust tilting pad bearings for ultra high thrust operating conditions can be provided.
The Gabbioneta VBN centrifugal pump series are designed to minimise axial thrust in low NPSH applications.
The VBN and VBN-DS Gabbioneta Pumps® are vertical multistage, heavy duty process pumps, available in double casing or wet pit configuration.
A wide range of sizes, number of stages and large eye suction or double suction 1st stage impeller, that allows to meet low NPSH requirements, complete the variery of the offered products.
The Gabbioneta AHPB pump series is built to reliably minimize axial and radial hydraulic thrust in high-temperature environments while resisting corrosion.
The AHPB, AHPB-DS Gabbioneta Pumps® are heavy duty double casing, multistage, radial split, with single or double 1st stage impeller pumps.
A wide range of sizes, number of stages combinations, various arrangements of suctions and discharge nozzles and three bearings arrangements and De-staged construction when required complete the variety of the offered products.
Gabbioneta DSA pumps offer axial balance, proven reliability and easy maintenance in the toughest conditions, including temperatures over 120 °C.
The DSA Gabbioneta Pumps® range are horizontal, between bearings with radial split casing and double suction impeller.
A wide range of sizes, various arrangements of suction and discharge noozzles and the three bearings arrangements available complete the variety of the offered procucts.
Gabbioneta DH and DDH process pumps, built for reliable service and easy maintenance, offer operational flexibility and stability in high temperatures.
The DH-DDH range Gabbioneta Pumps® are heavy duty horizontal, between bearings two stages pumps with radial split casing.
Two single suction back to back impellers for DH or a double suction first stage impeller, plus a second stage with bilancing drum for DDH, assure adequate axial thrust balance and allow to accept any type of balanced mechanical seals, in accordance with API 682 Stdandard.
Gabbioneta AXD/AXDD pumps offer easy maintenance and proven reliability for the tough conditions found in refineries and petrochemical plants.
The AXD-AXDD range Gabbioneta Pumps® are heavy duty horizontal, between bearings axial split casing pumps with single or double suction first stage impeller and, for AXDD, a second single suction impeller, with suction and discharge nozzles, integrally cast with the casing, arranged in in-line configuration.
The Gabbioneta RL range process pumps offer dedicated hydraulic designs to meet very low flow conditions.
The RL range Gabbioneta Pumps® are horizontal, radially split, centerline supported, single entry overhung pumps, designed in a back pull-out cofiguration for easy maintenance, centerline feet mounting for high temperature stability. RL pumps are specifically designed for low flow operations, featuring open Barske type impeller with radial vanes.
The all-around Gabbioneta R range process pumps provide superior efficiency for more than 100 different hydraulic configurations suitable for heavy-duty use.
The R Range Gabbioneta Pumps® are overhung horizontal radially split, centerline supported heavy duty process pumps, designed in a back pull-out configuration for easy maintenance and centerline feet mounting for high temperature stability.
The coverage includes more than 100 different hydraulics, for optimum efficiency over a wide operating range.
Shaft flexibility index is fully in compliance with API 610 Annex K and twin volute configuration minimises radial loads.
Vertical close coupled, single or multistage submersible motor pump, with a cast or fabricated discharge pipe.
The Floway® VSB (Vertical Submersible Pump) vertical close coupled, single and multistage submersible motor pump is suitable for various applications and markets. Available in wet pit or closed suction designs, this vertical submersible pump is also available in a selection of material combinations. The Floway® VSB has a compact connection between the pump and motor which provides maximum shaft support, flanged column option for ease of assembly, an internally mounted power cable to eliminate potential hazards and motor with water-tight insulated windings ensuring improved cooling, extended life and ease of maintenance.
API 610 current edition compliant vertical close coupled, single or multistage turbine pump, with fabricated discharge head, top mounted motor and wet pit (VS1) or closed suction (VS6).
Floway® VHP API 610 current edition compliant vertical close coupled, single or multistage turbine pump, with fabricated discharge head, top mounted motor and wet pit (VS1) or closed suction (VS6). Higher pressures with premium efficiencies and low operating costs. Available low NPSH impeller allows for a reduced barrel length. Pump bowl assembly is characterized as low energy per stage resulting in a broad flow range with excellent hydraulic stability. "O" ring joints throughout pump eliminates leaking for higher pressure applications. Throttle bearing provides shaft support and allows for higher operating pressures.
Vertical close coupled, single or multistage turbine pump, with a cast or fabricated discharge head, top mounted motor and closed suction or wet pit design.
Floway® VTP (Vertical Turbine Pump) is a vertical close coupled, single and multistage turbine pump which is suitable for multiple applications in various markets. This vertical water pump is available in a variety of material combinations for multiple applications. The VTP features a special toleranced motor coupling and jacking posts for precise motor/pump shaft alignment, special impeller balancing and reduced run-out on motor base resulting in industry leading low vibration levels. In addition the Floway® VTP has a tapered collet impeller mounting option for easy installation, lateral adjustment and low hydraulic thrust, Semi open impeller option for solids handling capability or flanged column option for ease of assembly.
Thank you. Check your email for details on your request..
Trillium Flow Technologies™, founded on a legacy of premier products and service, will continue to provide mission critical valves, pumps, and aftermarket services in oil and gas, power generation, water and wastewater, and general industry.